User Tools

Site Tools


Sidebar

strutture:lnf:da:btf:dispositivi:btf_remotabletable

REMOTABLE BENCH


Manuale Tavolo Remoto - IT
Remote Trolley Bench Manual - EN

PIGRE

→ Coordinates
Bench from the top VI table

  Movable platform X AXIS => 
    + means toward bench's cabinet
    - means the viceversa
  Movable platform Y AXIS =>
    + means up
    - means down
  • The unit is millimeters
  • Platform Homing position
    • HORIZONTAL = fully opposite the bench cabinet
    • VERTICAL = fully down
  • The absolute position is relative to software zero or homing position

→ User Menu

 1. Before installing please read the manual (on the top of this page) and put the table in homing position!
 2. When you setup the software limits, in case of successive advance menu opening, you will reset the user zero position
 3. The software limits are to be intended as the modulus of the maximum differential movement from the user zero position

→ Zero position and set up the software limits

 1. Get your own bench platform position
 2. setup the xy limits and press setup button (now the X and Y position is set to 0)
 3. free to move the table within new limits
 
 ATTENTION!!! If you want to reset the XY limits, you HAVE TO redo all the point 1., 2., 3.

→ Movable platform Minimum step = 0.5 mm
→ Movable platform Maximum step = 50 mm
→ Movable platform Recursive precision = 0.2 mm (relative to the payload)

→ Maximum range

 1. X = 984.0 mm
    Y = 380.0 mm (software 335.0 mm)
    
    

→ Beam-based alignment within the ground reference position

  X0=492mm (middle of frame) Y0 = 330.0 mm




Features and dimensions of the bench

  • Overall dimensions: 2100 x 705 x 915 mm (with the platform in the lowest position).
  • Weight of the bench: about 250 daN (including all the electrical components attached).
  • Travel of the moving platform:
  • * X-axis = 984 mm,
  • * Y-axis = lowest position 915 mm (ground clearance). Highest position (again from the ground) 1250 mm; 335 mm maximum excursion.
  • Maximum lifting weight load on the platform: 200 daN (kg).
  • Bench wheels for moving: n.4. Two fixed and two pivoting for manual handling, load capacity 180 daN (each).
  • Handles: n.4. Two per side for taking and moving the bench, load capacity each. 200 daN. (IMPORTANT: not to be used for lifting).
  • Feet: n.4. Use feet for supporting, position fixing, offset adjustment and leveling to the floor. Maximum load 2,300 daN.
  • Steel brackets provided with an eyelet for attaching lifting cables: n.4.
  • Movement Protections (automatic roller blinds for X-axis movement): 2.
  • Accident prevention spacers (Y-axis movement): 4.


Iron Platform Holding Surface

  • The movable surface has 25 drilled holes compatible with M8 screw.
  • The holes are placed in a grid having steps of 10cm, starting 10 cm from borders.
  • The thickness of the surface is 2 cm.
  • Iron platform: 600 x 600 x 20 mm.






Troubleshoot
In case of power shutdown, the table will lose the homing point.

Se si cambia l'escursione massima senza premere “Set” il sistema non ricentra lo zero utente (mantiene lo zero utente precedente) ma rileva in maniera errata i nuovi limiti di escursione massima

strutture/lnf/da/btf/dispositivi/btf_remotabletable.txt · Last modified: 2024/01/18 15:10 by diociaiu@infn.it