Differences

This shows you the differences between two versions of the page.

--- strutture:lnf:da:btf:dispositivi:btf_remotabletable [2014/02/11 17:17] – foggetta@infn.it
+++ strutture:lnf:da:btf:dispositivi:btf_remotabletable [2025/01/10 09:40] (current) – diociaiu@infn.it
@@ Line 1: / Line 1: @@
+==== REMOTABLE BENCH ====
+\\
+{{:strutture:lnf:da:btf:dispositivi:impianti:tavolo.pdf|Manuale Tavolo Remoto - IT}}\\
+{{:strutture:lnf:da:btf:dispositivi:remotetrolleytable_manual_en.pdf| Remote Trolley Bench Manual - EN}}
+\\
+**-> Coordinates**
+The beam Y position w.r.t. the floor is 1240 mm
+\\
+{{:strutture:lnf:da:btf:dispositivi:impianti:tavolo1.jpg|Bench from the top}}
+{{:strutture:lnf:da:btf:dispositivi:impianti:tavolocontr.jpg|VI table}}\\
+    Movable platform X AXIS =>
+      + means toward bench's cabinet
+      - means the viceversa
+    Movable platform Y AXIS =>
+      + means up
+      - means down
+  *The unit is millimeters
+  *Platform Homing position
+    * HORIZONTAL = fully opposite the bench cabinet
+    * VERTICAL = fully down
+  *The absolute position is relative to software zero or homing position
+**-> User Menu**
+. Before installing please read the manual (on the top of this page) and put the table in homing position!
+. When you setup the software limits, in case of successive advance menu opening, you will reset the user zero position
+. The software limits are to be intended as the modulus of the maximum differential movement from the user zero position
+**-> Zero position and set up the software limits**
+. Get your own bench platform position
+. setup the xy limits and press setup button (now the X and Y position is set to 0)
+. free to move the table within new limits
+   ATTENTION!!! If you want to reset the XY limits, you HAVE TO redo all the point 1., 2., 3.
+**-> Movable platform Minimum step = 0.5 mm**\\
+**-> Movable platform Maximum step = 50 mm**\\
+**-> Movable platform Recursive precision = 0.2 mm (relative to the payload)**\\
+**-> Maximum range **\\
+. X = 984.0 mm
+      Y = 380.0 mm (software 335.0 mm)
+**-> Beam-based alignment within the ground reference position**
+ \\
+    X0=492mm (middle of frame) Y0 = 330.0 mm
+ \\
+\\
+\\ **Features and dimensions of the bench**
+  * Overall dimensions: 2100 x 705 x 915 mm (with the platform in the lowest position).
+  * Weight of the bench: about 250 daN (including all the electrical components attached).
+  * Travel of the moving platform:
+  *   * X-axis = 984 mm,
+  *   * Y-axis = lowest position 915 mm (ground clearance). Highest position (again from the ground) 1250 mm; 335 mm maximum excursion.
+  * Maximum lifting weight load on the platform: 200 daN (kg).
+  * Bench wheels for moving: n.4. Two fixed and two pivoting for manual handling, load capacity 180 daN (each).
+  * Handles: n.4. Two per side for taking and moving the bench, load capacity each. 200 daN. (IMPORTANT: not to be used for lifting).
+  * Feet: n.4. Use feet for supporting, position fixing, offset adjustment and leveling to the floor. Maximum load 2,300 daN.
+  * Steel brackets provided with an eyelet for attaching lifting cables: n.4.
+  * Movement Protections (automatic roller blinds for X-axis movement): 2.
+  * Accident prevention spacers (Y-axis movement): 4.
+\\
+**Iron Platform Holding Surface**\\
+\\
+  * The movable surface has 25 drilled holes compatible with M8 screw. \\
+  * The holes are placed in a grid having steps of 10cm, starting 10 cm from borders.\\
+  * The thickness of the surface is 2 cm.\\
+  * Iron platform: 600 x 600 x 20 mm.
+\\
+\\
+{{:strutture:lnf:da:btf:dispositivi:table_Jan24.png?200|}}
+{{:strutture:lnf:da:btf:immagine_whatsapp_2025-01-10_ore_10.36.34_01444ad4.jpg|}}
+{{:strutture:lnf:da:btf:immagine_whatsapp_2025-01-10_ore_10.36.34_01444ad4.jpg|}}\\
+\\
+\\
+**Troubleshoot**\\
+In case of power shutdown, the table will lose the homing point.
+Se si cambia l'escursione massima senza premere “Set” il sistema non ricentra lo zero utente (mantiene lo zero utente precedente) ma rileva in maniera errata i nuovi limiti di escursione massima