Differences

This shows you the differences between two versions of the page.

--- strutture:lnf:dr:tps:teststand:home [2010/01/21 09:24] – asarti@lnf.infn.it
+++ strutture:lnf:dr:tps:teststand:home [2010/01/22 09:50] (current) – asarti@lnf.infn.it
@@ Line 1: / Line 1: @@
+====== Energetica Test stand page ======
+===== Software =====
+==== Acquisition ====
+CPU VME account: daq@151.100.44.118
+Software is on the 'VME CPU'.
+  * Log in into the CPU
+  * Go to CT directory
+  * Customize the setup in main_acquisition.h
+  * make clean
+  * make acquire
+  * acquire -n nevts -p freq -f output_file -z zero_suppression
+**The zero suppression is ENABLED by default.**
+The data/ directory is linked to the analizer software so probably you'd like to write the output there.
+=== Configuring the acquisition ===
+  * The modules that are acquired are specified in the main_acquisition.h file trough define statements:
+<code cpp>
+#define IOREG 1
+#define TDC1190 1
+#define TDCKLOE 0
+#define WVD1721 1
+#define WVD1724 0
+#define ADC265 0
+</code>
+you need to **recompile** in order to apply your changes after modifying the main_acquisition.h file
+=== Stopping the acquisition ===
+The acquisition can be stopped at anny moment  by creating an **acq.stop** file in the directory where the acquisition is running.
+<code>
+enrg44:~/acq$ touch acq.stop
+</code>
+In this case the acq is stopped nicely after finishing the last trigger and automatically clean up the acq.stop file in order to be ready to restart again.
+==== Module Software Description ====
+The addresses and the debug settings are in
+  * wvd1724_lib.h
+  * adc265_lib.h
+  * ioreg_lib.h
+  * tdc1190_lib.h
+  * wvd1721_lib.h
+The algorithm implementation is in
+  * wvd1724_lib.c
+  * adc265_lib.c
+  * ioreg_lib.c
+  * tdc1190_lib.c
+  * wvd1721_lib.c
+=== TDC 1190 ===
+=== Wave Form digitizer ===
+==== Analysis ====
+Software is on the laptop
+  * Go to acq directory
+=== Data ===
+Data acquired can be found in the **data** directory that is a soft link to the VME disk.
+=== Configuration File ===
+The configuration file should be provided to Analizer trough the -con option
+Analizer -con myconf.txt
+Where the myconf.txt syntax can be seen in the conf_energ.txt file [please do not overwrite it! make your own copy and provide it to Analizer].