INFN wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Catania 10 TB ======

Going to acquire:
  - Start counter (1 or 2): Scintillator
  - Tracker: DCH
  - Dump: Scintillator 

=== Hot topic ===

  * Crate NIM: at least 2 given the number of modules [2 HV modules + 6-7 DISC modules]
  * Splitters?
  * Check crate VME
  * Check disc CAMAC
  * Check Cables @ Catania

=== Readout ===

==== TDC ====

  * From SC: 2 ch -> NIM Linear Fan in/out -> NIM Disc -> NIM/ECL transl
  * From BD: 2 ch -> NIM Linear Fan in/out -> NIM Disc -> NIM/ECL transl
  * From OLD dch: 
    * 16 ch (1 view) -> CAMAC Disc
    * 12 ch (3 planes) -> CAMAC Disc
    *  4 ch (4th plane) -> Disc [in/out] -> NIM/ECL transl
  * From NEW dch: 
    * 12 ch (1 view, 4 planes) -> CAMAC Disc
    *  6 ch (2 planes) -> CAMAC Disc
    *  3 ch (1 plane) -> NIM Disc -> NIM/ECL transl
    *  3 ch (4th plane) -> Disc [in/out] -> NIM/ECL transl
  - Summary Modules
    * 3 CAMAC disc: 46 Ch (2 dead)
    * 1 HV (big) 4 ch (for scint)
    * 1 HV (small) 4 ch chmb
    * 1 8 ch disc in/out (chmb channels to TDC,ADC)
    * 1 4 ch fan in/out linear (scint ch to TDC, ADC)
    * 1 8 ch disc (50 Ohm in) for channels from scint
    * 1 16 ch NIM/ECL transl
    * 1 Coincidence
    * 1 Dual timer
    * 1 Gating/delay module
  - Spare
    * 1 8ch disc (50 Ohm in)
    * crate NIM?
    * Scaler 


===== Preliminary Schedule =====

  * Leaving Thursday night 1/07
  * Friday 2/07 -> cabling + cosmics setup
  * Monday 5/07 -> change from cosmics to beam 

=== Timing Config ===

  * First dual timer
    * In from coincidence. Shaping 10-100 mus. Out to 2nd DT. Endmarker to strobe of IOREG.
  * Second dual timer
    * In From 1st DT. !out to Trigger. Shaping inf. Reset from IOREG.