INFN wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
==== Profilometro ====

[[http://agenda.infn.it/getFile.py/access?resId=7&materialId=paper&confId=1100|Internal note]]

=== Mapping ===
Routing from V792 to Hamamatsu multianode coupling

(A) high density connector on V792
(B) LEMO to BNC coupling
(C) 10m fixed position BNC cable
(D) BNC to LEMO couplings
(E) 5m LEMO cable
(F) I LEMO to multianode LEMO

Reference system -> beam
== Horizontal channels ==
 -> fiber axis Y\\
 -> 90 degree rotation than natural mapping\\
 -> V792 channel slot: 0-15


| (A) ADC CH                  | 0| 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|
| (C) BNC Mark                | 0| 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|
| (D) Lemo Cable (BNC_side)   | 0| 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|
| (E) LEMO Cable(Multian side)| 4| 8|12|16| 3| 7|11|15| 2| 6|10|14| 1| 5| 9|13|
| (F) Mark/ch on multianode   | 4| 8|12|16| 3| 7|11|15| 2| 6|10|14| 1| 5| 9|13|



== Vertical Channels ==
 -> fiber axis X\\
 -> natural mapping\\
 -> V792 channel slot: 16-31
| (A) ADC CH                  |16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
| (C) BNC Mark                |16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
| (D) Lemo Cable (BNC_side)   |16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
| (E) LEMO Cable(Multian side)|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
| (F) Mark/ch on multianode   | 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|16|
=== Power Supply ===
 
__HV PS\\ 
Caen Sy2527\\ 
Caen A1733N__\\ 

MultiAnode PM Hamamatsu R5900-00-N16\\ 
\\ 
Voltage = -850V (NEGATIVE!!!!!!)\\
Typical Bias current = 299.0uA\\