Differences

This shows you the differences between two versions of the page.

--- strutture:lnf:da:btf:dispositivi:rivelatori:profilometro [2015/02/27 17:42] – foggetta@infn.it
+++ strutture:lnf:da:btf:dispositivi:rivelatori:profilometro [2015/09/29 09:48] (current) – foggetta@infn.it
@@ Line 1: / Line 1: @@
+==== Profilometro ====
+[[http://agenda.infn.it/getFile.py/access?resId=7&materialId=paper&confId=1100|Internal note]]
+=== Mapping ===
+Routing from V792 to Hamamatsu multianode coupling
+(A) high density connector on V792
+(B) LEMO to BNC coupling
+(C) 10m fixed position BNC cable
+(D) BNC to LEMO couplings
+(E) 5m LEMO cable
+(F) I LEMO to multianode LEMO
+Reference system -> beam
+== Horizontal channels ==
+ -> fiber axis Y\\
+ -> 90 degree rotation than natural mapping\\
+ -> V792 channel slot: 0-15
+| (A) ADC CH                  | 0| 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|
+| (C) BNC Mark                | 0| 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|
+| (D) Lemo Cable (BNC_side)   | 0| 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|
+| (E) LEMO Cable(Multian side)| 4| 8|12|16| 3| 7|11|15| 2| 6|10|14| 1| 5| 9|13|
+| (F) Mark/ch on multianode   | 4| 8|12|16| 3| 7|11|15| 2| 6|10|14| 1| 5| 9|13|
+== Vertical Channels ==
+ -> fiber axis X\\
+ -> natural mapping\\
+ -> V792 channel slot: 16-31
+| (A) ADC CH                  |16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
+| (C) BNC Mark                |16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
+| (D) Lemo Cable (BNC_side)   |16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
+| (E) LEMO Cable(Multian side)|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
+| (F) Mark/ch on multianode   | 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|16|
+=== Power Supply ===
+__HV PS\\
+Caen Sy2527\\
+Caen A1733N__\\
+MultiAnode PM Hamamatsu R5900-00-N16\\
+\\
+Voltage = -850V (NEGATIVE!!!!!!)\\
+Typical Bias current = 299.0uA\\