Differences

This shows you the differences between two versions of the page.

--- progetti:cloud-areapd:ceph:replace_a_osd [2017/05/03 08:09] – sgaravat@infn.it
+++ progetti:cloud-areapd:ceph:replace_a_osd [2020/04/29 09:49] (current) – sgaravat@infn.it
@@ Line 1: / Line 1: @@
+====== Replace a OSD ======
+==== Replace a FileStore OSD ====
+Let's suppose that osd.27 (device /dev/sdj) is broken.
+Let's verify that this is a filestore OSD:
+<code bash>
+# ceph osd metadata 27 | grep osd_ob
+    "osd_objectstore": "filestore",
+</code>
+Let's suppose that this OSD is using /dev/sdb3 for the journal:
+<code bash>
+[root@ceph-osd-03 ~]# ceph-disk list | grep osd.27
+ /dev/sdj1 ceph data, active, cluster ceph, osd.27, journal /dev/sdb3
+</code>
+The following operations should be done to remove it from ceph:
+<code bash>
+ceph osd crush reweight osd.27 0
+</code>
+Wait that the status is HEALTH-OK.
+Then:
+<code>
+ceph osd out osd.27
+ceph osd crush remove osd.27
+systemctl stop ceph-osd@27.service
+ceph auth del osd.27
+ceph osd rm osd.27
+umount /var/lib/ceph/osd/ceph-27
+</code>
+Replace the disk.
+Run the prepare command (make sure to specify the right partition of the SSD disk):
+<code bash>
+ceph osd set noout
+ceph-disk prepare --zap --cluster ceph --cluster-uuid 8162f291-00b6-4b40-a8b4-1981a8c09b64 --filestore --fs-type xfs /dev/sdj /dev/sdb3
+</code>
+Then enable the start of OSD at boot time it:
+<code bash>
+ceph-disk activate /dev/sdj1
+</code>
+If everything is ok, re-enable the data balance:
+<code bash>
+ceph osd unset noout
+</code>
+==== Replace a BlueStore OSD ====
+Let's suppose that osd.14 (/dev/vdd) is broken.
+Let's verify that this is a Bluestore OSD:
+<code bash>
+# ceph osd metadata 14 | grep osd_ob
+    "osd_objectstore": "bluestore",
+</code>
+Let's find the relevant devices:
+<code bash>
+[root@c-osd-5 /]# ceph-bluestore-tool show-label --path /var/lib/ceph/osd/ceph-14/
+infering bluefs devices from bluestore path
+{
+    "/var/lib/ceph/osd/ceph-14//block": {
+        "osd_uuid": "d14443ed-2f7d-4bbc-8cdf-f55c7e00a9b5",
+        "size": 107369988096,
+        "btime": "2019-01-30 16:33:54.429292",
+        "description": "main",
+        "bluefs": "1",
+        "ceph_fsid": "7a8cb8ff-562b-47da-a6aa-507136587dcf",
+        "kv_backend": "rocksdb",
+        "magic": "ceph osd volume v026",
+        "mkfs_done": "yes",
+        "osd_key": "AQDWw1Fc6g0zARAAy97VirlJ+wC7FmjlM0w3aQ==",
+        "ready": "ready",
+        "whoami": "14"
+    },
+    "/var/lib/ceph/osd/ceph-14//block.db": {
+        "osd_uuid": "d14443ed-2f7d-4bbc-8cdf-f55c7e00a9b5",
+        "size": 53687091200,
+        "btime": "2019-01-30 16:33:54.432415",
+        "description": "bluefs db"
+    }
+}
+</code>
+Let's find the volume groups used for the block and block.db:
+<code>
+[root@c-osd-5 /]# ls -l /var/lib/ceph/osd/ceph-14//block
+lrwxrwxrwx 1 ceph ceph 27 May 13 15:34 /var/lib/ceph/osd/ceph-14//block -> /dev/ceph-block-14/block-14
+[root@c-osd-5 /]# ls -l /var/lib/ceph/osd/ceph-14//block.db
+lrwxrwxrwx 1 ceph ceph 24 May 13 15:34 /var/lib/ceph/osd/ceph-14//block.db -> /dev/ceph-db-12-15/db-14
+[root@c-osd-5 /]#
+</code>
+Let's verify that vdd is indeed the physical volume used for this OSD:
+<code bash>
+[root@c-osd-5 /]# vgdisplay -v ceph-block-14
+  --- Volume group ---
+  VG Name               ceph-block-14
+  System ID
+  Format                lvm2
+  Metadata Areas        1
+  Metadata Sequence No  15
+  VG Access             read/write
+  VG Status             resizable
+  MAX LV                0
+  Cur LV                1
+  Open LV               1
+  Max PV                0
+  Cur PV                1
+  Act PV                1
+  VG Size               <100.00 GiB
+  PE Size               4.00 MiB
+  Total PE              25599
+  Alloc PE / Size       25599 / <100.00 GiB
+  Free  PE / Size       0 / 0
+  VG UUID               lcEfNK-P7gw-ddeH-ijGC-2d6z-WuUo-hqI1H2
+  --- Logical volume ---
+  LV Path                /dev/ceph-block-14/block-14
+  LV Name                block-14
+  VG Name                ceph-block-14
+  LV UUID                hu4Xop-481K-BJyP-b473-PjEW-OQFT-oziYnc
+  LV Write Access        read/write
+  LV Creation host, time c-osd-5.novalocal, 2019-01-30 11:22:24 +0100
+  LV Status              available
+  # open                 4
+  LV Size                <100.00 GiB
+  Current LE             25599
+  Segments               1
+  Allocation             inherit
+  Read ahead sectors     auto
+  - currently set to     8192
+  Block device           252:14
+  --- Physical volumes ---
+  PV Name               /dev/vdd
+  PV UUID               2ab6Mn-8c5b-rN1H-zclU-uhnF-YJmF-e0ITMt
+  PV Status             allocatable
+  Total PE / Free PE    25599 / 0
+[root@c-osd-5 /]#
+</code>
+The following operations should be done to remove it from ceph:
+<code bash>
+ceph osd crush reweight osd.14 0
+</code>
+This will trigger a data movement from that OSD (ceph status will report many objects misplaced)
+Wait until there are no more objects misplaced
+Then:
+<code bash>
+ceph osd out osd.14
+</code>
+Verifichiamo che si possa "rimuovere" l'OSD
+<code bash>
+[root@ceph-mon-01 ~]# ceph osd safe-to-destroy 14
+OSD(s) 14 are safe to destroy without reducing data durability.
+</code>
+<code bash>
+[root@ceph-osd-02 ~]# systemctl kill ceph-osd@14
+[root@ceph-osd-02 ~]# ceph osd destroy 14 --yes-i-really-mean-it
+[root@ceph-osd-02 ~]# umount /var/lib/ceph/osd/ceph-14
+</code>
+Cancelliamo il volume group:
+<code bash>
+[root@c-osd-5 /]# vgremove ceph-block-14
+Do you really want to remove volume group "ceph-block-14" containing 1 logical volumes? [y/n]: y
+Do you really want to remove active logical volume ceph-block-14/block-14? [y/n]: y
+  Logical volume "block-14" successfully removed
+  Volume group "ceph-block-14" successfully removed
+[root@c-osd-5 /]#
+</code>
+Sostituiamo il disco. Supponiamo che quello nuovo si chiami sempre vdd.
+Ricreo volume group e logical volume:
+<code bash>
+[root@c-osd-5 /]# vgcreate ceph-block-14 /dev/vdd
+  Physical volume "/dev/vdd" successfully created.
+  Volume group "ceph-block-14" successfully created
+[root@c-osd-5 /]# lvcreate -l 100%FREE -n block-14 ceph-block-14
+  Logical volume "block-14" created.
+[root@c-osd-5 /]#
+</code>
+Alla fine ricreiamo l'OSD:
+<code bash>
+ceph osd set norebalance
+ceph osd set nobackfill
+[root@c-osd-5 /]# ceph-volume lvm create --bluestore --data ceph-block-14/block-14 --block.db ceph-db-12-15/db-14 --osd-id 14
+</code>
+Dopo un po`, quando non ci sono piu` pg in peering:
+<code bash>
+ceph osd crush reweight osd.14 5.45609
+ceph osd unset nobackfill
+ceph osd unset norebalance
+</code>