BTF Data Acquisition

This is the configuration on BTFEH1

1. Ethernet VME_VMIC 7807
   • 192.168.192.75 (dante075), MAC:00203801C8AB, SWBTFEH11, porta 36
   • vnc on danteweb:5975,
   • /u2/dcs/source_linux/standalone/btf_daq/trunk/DAQ_BTF_m5.2.vi
2. SVMEE
3. NIM crate

Networking with DAQ

• QDC1 (profilemeter, Caen V792) = 0x000000
• QDC2 (Calorimeter, V965b) = 0xAA0000
• Scaler (SYS 3800) = 0xC08000
• PIO (I/O register, Caen V513) = F00000

This is the configuration on BTFEH2

1. Ethernet VME_VMIC 7807
   • 192.168.192.73 (dante073), MAC 002038015547,SWBTFEH23 porta 38
   • vnc on danteweb:5973,
   • /u2/dcs/source_linux/standalone/btf_daq/trunk/DAQ_BTFEH2_m5.2.vi
2. SVMEE
3. NIM crate

Networking with DAQ

• QDC1 (profilemeter, Caen V792) = 0xAA0000
• QDC2 (Calorimeter, V965b) = 0xBB0000
• Scaler (SYS 3800) = 0x380000
• PIO (I/O register, Caen V513) = 00CC00

Standard VME Elements

• SYS 3800 - Scaler - Counting of this signals:
  • Trigger from DDG- on CH30
  • Acquired trigger - on CH31

• Caen V792 - QDC1 - Controlled elements:
  • Profilemeter
  • All channels are used

• Caen V513 - Digital I/O
  • Used for BTF-DAQ control purposes (veto generation and distribuition)

• Caen V965 - QDC2 - Controlled elements:
  • WCM1 - on CH0
  • WCM2 - on CH1
  • Calorimeter in BTF - CH7
    

• 2 X Caen V550 - Strip - Photon-tag - with hardware pedestal subtraction
  

• TDC
  

• Caen V556- PEAK Detector