====== BTF Data Acquisition ======

===== HW Techs =====
\\
\\
==== BTFEH 1 ====
This is the configuration on BTFEH1\\

=== VME Crate ===
  - Ethernet VME_VMIC 7807 - 192.168.192.75 (dante075), vnc on danteweb:5975, /u2/dcs/source_linux/standalone/btf_daq/trunk/DAQ_BTF_m5.2.vi
  - SVMEE
  - NIM crate

[[strutture:lnf:da:btf:dispositivi:impianti:networking|Networking with DAQ]]\\
\\

=== BTFEH1 ADDRESSES SVMEE ===

  * QDC1 (profilemeter, Caen V792) = 0x000000
  * QDC2 (Calorimeter, V965b) = 0xAA0000
  * Scaler (SYS 3800) = 0xC08000
  * PIO (I/O register, Caen V513) = F00000

----

==== BTFEH 2 ====
This is the configuration on BTFEH1\\
=== VME Crate ===
  - Ethernet VME_VMIC 7807 - 192.168.192.73 (dante073), vnc on danteweb:5973, /u2/dcs/source_linux/standalone/btf_daq/trunk/DAQ_BTFEH2_m5.2.vi
  - SVMEE
  - NIM crate

[[strutture:lnf:da:btf:dispositivi:impianti:networking|Networking with DAQ]]\\
\\

=== BTFEH2 ADDRESSES SVMEE ===

  * QDC1 (profilemeter, Caen V792) = 0xAA0000
  * QDC2 (Calorimeter, V965b) = 0xBB0000
  * Scaler (SYS 3800) = 0x380000
  * PIO (I/O register, Caen V513) = 00CC00

----


==== SVMEE ====
Standard VME Elements

  * SYS 3800 - Scaler - Counting of this signals:
    * Trigger from DDG- on CH30
    * Acquired trigger - on CH31


  * [[strutture:lnf:da:btf:dispositivi:daq:v792|Caen V792]] - QDC1 - Controlled elements:
    * [[strutture:lnf:da:btf:dispositivi:rivelatori:profilometro|Profilemeter]]
    * All channels are used
  
  
  * Caen V513 - Digital I/O
      * Used for BTF-DAQ control purposes (veto generation and distribuition)


  * Caen V965 - QDC2 - Controlled elements:
    * [[strutture:lnf:da:btf:dispositivi:btf_diagnostic:wcm|WCM1]] - on CH0
    * [[strutture:lnf:da:btf:dispositivi:btf_diagnostic:wcm|WCM2]] - on CH1
    * [[strutture:lnf:da:btf:dispositivi:rivelatori:calorimeter|]] - CH7\\

  * 2 X Caen V550 - Strip - Photon-tag - with hardware pedestal subtraction\\

  * TDC \\

  * Caen V556- PEAK Detector\\