Going to acquire:

1. Start counter (1 or 2): Scintillator
2. Tracker: DCH
3. Dump: Scintillator

• Crate NIM: at least 2 given the number of modules [2 HV modules + 6-7 DISC modules]
• Splitters?
• Check crate VME
• Check disc CAMAC
• Check Cables @ Catania

• From SC: 2 ch → NIM Linear Fan in/out → NIM Disc → NIM/ECL transl
• From BD: 2 ch → NIM Linear Fan in/out → NIM Disc → NIM/ECL transl
• From OLD dch:
  • 16 ch (1 view) → CAMAC Disc
  • 12 ch (3 planes) → CAMAC Disc
  • 4 ch (4th plane) → Disc [in/out] → NIM/ECL transl
• From NEW dch:
  • 12 ch (1 view, 4 planes) → CAMAC Disc
  • 6 ch (2 planes) → CAMAC Disc
  • 3 ch (1 plane) → NIM Disc → NIM/ECL transl
  • 3 ch (4th plane) → Disc [in/out] → NIM/ECL transl

1. Summary Modules
   • 3 CAMAC disc: 46 Ch (2 dead)
   • 1 HV (big) 4 ch (for scint)
   • 1 HV (small) 4 ch chmb
   • 1 8 ch disc in/out (chmb channels to TDC,ADC)
   • 1 4 ch fan in/out linear (scint ch to TDC, ADC)
   • 1 8 ch disc (50 Ohm in) for channels from scint
   • 1 16 ch NIM/ECL transl
   • 1 Coincidence
   • 1 Dual timer
   • 1 Gating/delay module
2. Spare
   • 1 8ch disc (50 Ohm in)
   • crate NIM?
   • Scaler

• Leaving Thursday night 1/07
• Friday 2/07 → cabling + cosmics setup
• Monday 5/07 → change from cosmics to beam

• First dual timer
  • In from coincidence. Shaping 10-100 mus. Out to 2nd DT. Endmarker to strobe of IOREG.
• Second dual timer
  • In From 1st DT. !out to Trigger. Shaping inf. Reset from IOREG.